Graco 3A1215C Manual do Utilizador descarregar pdf (Página 8)

Operation

8 3A1215C

Marker Layout Mode

Change Value

Set space sizes up to 8 consecutive measurements. By leav-

ing zeros in any space, Marker Layout Mode will skip to the

next measurement in a continuous loop.

DOT Size (sec)

The amount of time the gun will be activated.

NOTE: Lowering system pressure may help produce smaller

more precise DOTS.

Marker Layout Mode Example:

Diagnostics

 

  

  

  

  

  

  

  











































ti16379a

NOTE: To operate Marker Layout Mode, you must be in the Marker Layout Mode Menu.

Choose a spray gun and toggle that switch to the skipline setting.

 

  

  

  

  

  

  

  



















1. Set space sizes.

2. Select DOT SIZE (amount of time gun activates).

3. Select one or more guns in skip line.

4. Activate with HOLD/RESET switch.

48.00 ft

16.00 ft

8.00 ft4.00 ft 4.00 ft8.00 ft

4.00 ft 4.00 ft

ti16733a

Diagnostics

gun safety ON OFF

Exit

ROADLAZER ROADPAK

ROADLAZER TOW BEHIND

Distance 0

Pump 1 0

Pump 2 0

Pump 3 0

Reset

counters

SOLENOIDS

12345 6

SWITCH TEST

CAUTION

SOLENOIDS WILL

STILL ACTUATE

123

BEADS ON

BEAD TEST

ADV

RET

RESET

HOLD

Diagnostics

Exit

Distance 0

Pump 1 0

Pump 2 0

Reset

counters

SOLENOIDS

12345 6

SWITCH TEST

CAUTION

SOLENOIDS WILL

STILL ACTUATE

123

BEADS ON

BEAD TEST

ADV

RET

RESET

HOLD

This menu is used to verify inputs from control box switches and sensors on the sys-

tem, as well as to check if the solenoids are functioning properly. NOTE: Solenoid

will still be active during the test, which could result in turning the paint and bead

guns ON and OFF.

Distance - Counts 50 +/- 2 pulses per revolution of the wheel. Input can be checked

by spinning the RoadPak gun arm wheel.

Pump 1 and Pump 2 - Counts one pulse per complete cycle/stroke.

Switches: The darkened box indicates the position of the switch. Toggle each switch

individually and the darkened box should move to the new location if functioning

properly. If the darkened box does not move, the switch is not functioning properly

and will most likely need to be replaced.

Solenoids - Checks for presence of solenoid valve in system. A darkened box indi-

cates solenoid is recognized by the control box. Solenoids will not be recognized with

gun arm in up position when mechanical safety switch is used. Solenoid bank will not

appear if power is not present.

ti17006b

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Graco 3A1215C Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Graco 3A1215C