Graco 312668W Manual do Utilizador

InstructionsLDM5 (Standard) & LDP5 (Preset) Electronic Metered Dispense Valves312668WFor metered dispense of oils and antifreeze. For professional

LDM5 Meter Setup and Operation Instructions 10 312668WSetup Menus (FIG. 10)1. If the display is blank (asleep), wake it up by press-ing any button on

LDM5 Meter Setup and Operation Instructions312668W 11Resettable Total (FIG. 11)Resets dispensed total on screen to zero or stores dis-played dispense

LDM5 Meter Setup and Operation Instructions 12 312668WCalibration (FIG. 13)Recalibrates the meter for dispensing different fluids.1. If the Calibratio

LDM5 Meter Setup and Operation Instructions312668W 13OperationDispensing Fluid in Standard Mode1. If the display was blank (in sleep mode), press and

LDM5 Meter Setup and Operation Instructions 14 312668WViewing TotalsThis is the procedure for viewing the non–resettable and resettable totals in gall

LDM5 Meter Setup and Operation Instructions312668W 15Error CodeIf an error code is shown on the display, as shown in FIG. 19, you can press the Reset

LDP5 Meter Setup and Operation Instructions 16 312668WLDP5 Meter Setup and Operation InstructionsSetupLocking and Unlocking the Trigger To lock the tr

LDP5 Meter Setup and Operation Instructions312668W 17Keypad Buttons (FIG. 22)• Manual / Reset* Used to select Manual Mode dispensing (see Terms). The

LDP5 Meter Setup and Operation Instructions 18 312668Wc. Press and hold the Auto / Reset button again to display the Calibration Menu (FIG. 26, page 1

LDP5 Meter Setup and Operation Instructions312668W 19Units of Measurement (FIG. 25)Sets the units of measurement to gallons, quarts, pints, or liters.

Models 2 312668WModelsMeter Model No.ExtensionImpact GuardSwivel CoverInletRigid Flex NPT BSPT BSPPLDM5 255751XXLDM5 256215 X X X XLDM5 258693XXXXLDM5

LDP5 Meter Setup and Operation Instructions 20 312668Wb. Press and hold the Manual / Reset button until CAL stops blink-ing. c. When CAL starts to bli

LDP5 Meter Setup and Operation Instructions312668W 21Shut–Off Default Amount (FIG. 28)Prevents accidental overfills when dispensing with the trigger l

LDP5 Meter Setup and Operation Instructions 22 312668WOperationDispensing Fluid in Manual Mode (FIG. 29)1. Press and hold the Man-ual/Reset button.• I

LDP5 Meter Setup and Operation Instructions312668W 23Dispensing Fluid in Auto Mode (FIG. 30)1. Press and hold the Auto/Reset button.The display wakes

LDP5 Meter Setup and Operation Instructions 24 312668WViewing TotalsThis is the procedure for viewing the non–resettable and resettable totals. To cha

LDP5 Meter Setup and Operation Instructions312668W 25Error CodesError codes are listed below. Even in an error condition, the unit keeps track of the

Troubleshooting 26 312668WTroubleshootingRelieve Pressure Relief Procedure, page 5, before you check or repair the meter. Be sure all other valves an

Troubleshooting312668W 27Meter leaks from Cover/Control Poor swivel (3)/hose connection. Apply PTFE tape (leave minimum 2 engaged threads uncovered fo

NOTES 28 312668WNOTES

Parts312668W 29PartsEM5/PM5 Upgrade Kits†Nozzle Extension Accessory Kits (FN 26)Thermal Relief Kits (page 5)FN Part No. Description Qty1 257350 CONTRO

Warnings312668W 3WarningsThe following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point s

Parts 30 312668WModels 255751, 255277, 258693, 258694,24F885, 24F886, 24F891, 24F892, 255751, 255277, 24F881, 24F883,24F887, 24F88926: Flexible Extens

Service312668W 31ServiceReplacing the BatteryTo change the battery, remove the battery cover, and replace the old battery with a new battery (FIG. 34)

Technical Data 32 312668WTechnical Data* Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.** Battery requir

Notes312668W 33Notes

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Warnings 4 312668WPERSONAL PROTECTIVE EQUIPMENTWear appropriate protective equipment when in the work area to help prevent serious injury, including e

Installation312668W 5InstallationTypical InstallationsFIG. 1 shows a typical hose reel installation. Dispense valves can also be installed on a consol

Installation 6 312668WPressure Relief ProcedureThe equipment stays pressurized until pressure is man-ually relieved. To reduce the risk of serious inj

Installation312668W 74.a. Place the hose end (with no dispense valve connected) into a container for waste oil.b. Secure the hose in the container so

Installation 8 312668WInstalling Extension and Nozzle on Meter1. Thread the sealing nut (26c) onto the extension (26a).2. Thread extension into meter

LDM5 Meter Setup and Operation Instructions312668W 9LDM5 Meter Setup and Operation InstructionsSetupTermsThe following terms are shown on the display