Graco 3A2960EN-D Manual do Utilizador

InstructionsGLC 2200 Lubrication Controller3A2960DFor controlling and monitoring an automated lubrication system. Not approved for outdoor use or use

Installation 10 3A2960DSensor Wiring ConfigurationsDRY CONTACT SWITCH SOURCE SWITCH - 2 or 3 Wire TypeFIG. 84 9 GLC 2200FIG. 94 +VDC-VDCGLC 2200

Setup3A2960D 11SetupEntering SETUP MODE1. Press both the UP and DOWN ARROW buttons together for three seconds.NOTE: • If a button is not pushed for 1

Setup 12 3A2960DThe cursor automatically moves to the second number field and flashes.Use the UP or DOWN ARROW to scroll through the numerals 0-9 unti

Setup3A2960D 131. To set the ON Time use the UP or DOWN ARROW button to scroll through numerals 0 to 5 until the desired number appears in the first M

Setup 14 3A2960D1. Use the UP or DOWN ARROW until LL:02 displays. This will set the controller up to use a "pad-dle-style" low level algorit

Setup3A2960D 15Cycle Mode: Pump ONThe display alternates between the number of cycles remaining and indicates the amount of time remaining in the pump

Setup 16 3A2960DAlarm Types and MessagesAlarm Type Error Code Description Things to Check/DoLow Level Low lubricant levelRefill lubrication reservoir.

Parts3A2960D 17PartsRef. Description Qty1 BOX, enclosure 12 LABEL, control, overlay 13 LABEL, serial, name 14 LABEL, connector 11342

Troubleshooting 18 3A2960DTroubleshootingProgram SettingsAccessoriesRelated KitsDescription Problem SolutionUnit does not power on or display is dim/u

Technical Data3A2960D 19Technical Data Input Contact Power Source DC 9 - 30 VDCPower Consumption 1 WattCycle/Pressure Control Input (optional) 9 - 30

Warnings 2 3A2960DWarningsThe following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point

Dimensions 20 3A2960DDimensions Mounting Hole Layout2.75 in. (70.0 mm)5.53 in.(140.0 mm)1.38 in.(35.0 mm)1.57 in. (40.0 mm) 4.92 in.(125.0 mm)2 x Ø0.2

Notes3A2960D 21Notes

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Component Identification3A2960D 3Component IdentificationKeypad, Display, and IconsPump ON LEDs (A, B, C)A Pressure Control LED: In RUN MODE illuminat

Installation 4 3A2960DInstallationTypical InstallationThe installation shown in FIG. 2 is only a guide for selecting and installing system components.

Installation3A2960D 5Installing the Lubrication Controller1. Select a flat surface to install the Lubrication Con-troller. Drill mounting holes. Refer

Installation 6 3A2960DSystem ConfigurationFIG. 4GLC 2200Low LevelSwitchPump &ReservoirInjector SystemPressureSwitchInjectorsLubrication PointsVent

Installation3A2960D 7FIG. 5GLC 2200Low LevelSwitchPump &ReservoirMaster Divider ValveSecondary Divider ValvesCycleSwitchDivider Valve SystemPump O

Installation 8 3A2960DFIG. 6GLC 2200ExternalAlarmLow LevelSwitchPump &ReservoirDual Line SystemCycleSwitchBi-floValvesLubrication PointsVentLinePu

Installation3A2960D 9Wiring DiagramModes of Operation: Optional I/O Wiring DiagramUsed with all modes of GLC2200 Operation*Normally open vent valve fo