Graco 312184B Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Pulverizador de tinta Graco 312184B. Graco 312184B User's Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
312184B
EN
Instructions - Parts List
Accessory Hopper Kit
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever you
see this symbol.
1. Engage trigger lock.
2. Turn ON/OFF switch to OFF.
3. Unplug power cord.
4. Disengage trigger lock. Hold metal part of gun against
grounded metal pail and trigger gun into pail to relieve
pressure.
5. Engage the trigger lock.
6. Open all fluid drain valves in the system, having a waste
container ready to catch drainage. Leave drain valve(s)
open until you are ready to spray again.
7. If you suspect the spray tip or hose is clogged or that pres-
sure has not been fully relieved after following the steps
above, VERY SLOWLY loosen tip guard retaining nut or
hose end coupling to relieve pressure gradually, then
loosen completely. Clear hose or tip obstruction.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid and
moving parts, follow the Pressure Relief Procedure when
you stop spraying and before cleaning, checking, or
servicing the equipment.
Ref. Part Description Qty
1 188787 HOPPER, 1.5 gallon 1
2 112133 SCREEN, hopper 1
3 287049 TUBE, inlet, hopper 1
4 15E813 NUT, jam 1
5 15B652 WASHER, suction 1
6 104938 PACKING, o-ring 1
7 117559 O-RING 2
2
6
3
5
4
7
1
ti25586a
Vista de página 0
1 2 3 4

Resumo do Conteúdo

Página 1 - Accessory Hopper Kit

312184BENInstructions - Parts ListAccessory Hopper KitPressure Relief ProcedureFollow the Pressure Relief Procedure whenever you see this symbol.1. En

Página 2 - 2. Remove suction set

2 312184B1. Follow Pressure Relief Procedure.2. Remove suction set.3. Remove hopper lid. Insert hopper tube into pump.4. Hand-tighten jam nut. Place

Página 4 - Graco Information

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Comentários a estes Manuais

Sem comentários